Flocking agent fastness print fixer for textile
Cowint offers item-flocking agent fastness print fixer for textile, More quantity in stock , 7 days can arrange shipment .Focusing on the field of high-end special materials.
Product
● Sell in small quantity with more competitive price
● More quantity in stock , 7days can arrange shipment
Product features
● The binder is the main element of the pigment printing paste, is a kind of high polymer film-forming material, through the film coating adhesion on the fabric, so request sticky agent for fabric have training of adhesion and reproducibility, described, solvent resistance, resistance to acid and alkali resistance, resistance to chemicals, film-forming clear transparent, don't change color, not injury fiber after printing, have certain elasticity, feel is good, and easy to remove from the printing machine.
● Thickening agent is another important component of pigment printing paste, it has the function of thickening color dyeing, promoting adhesion and emulsification, etc., the use of printing fabric to obtain uniform, soft and clear pattern.Not only can improve the color amount and brightness, and printing pulp or less use kerosene.There are two types of synthetic thickeners, anion type and non-ion type. The former has strong adaptability and can be used for anti-dyeing and dyeing printing, but its thickening effect is poor.The latter has a high viscosity and thickening effect, and has no adverse effect on the color brightness, washing fastness and softness of printed fabrics.
Method of use
● Normal usage is 1%,depend on the rubber and special rubber print,it will be around 0.5%-2%.
● For rubber and special rubber print.it should keep 2 hours hanging.after that can send to curing by 120-150℃with 90s.
● Fastness additives CTA-F28/CTA-F31/CTA-F32 mucilage is commonly used in fertilizer, such as mucilage, the G7 / G8, T20/T21 mucilage additives, also known as cross linking agent, bridging agent, the immortal water, curing agent, it increase fastness effect is very obvious.
● Also can be used as an adhesive bead pulp ABP1 fastness additives, electrostatic flocking pulp 510 solid additives,also can be used in water slurry of T10 soft and increase the washing fastness. Usually add from 0.5% to 1%, within 6 hours after mixing after use.
Certificate
FAQ
Q1: Could you please give me the quality sample?
A: If you need some sample for reference,please let us know your fully address/ship mode with courier,and we will arrange our available sample for your reference.
Q2: Warranty
A: Quality guarantee: 12 months.
Q3: Are you a trading company or a manufacturer?
A: We are a manufacturer, Also a trader
Service
Cowint Provide you with after-sales service
1. We provide the professional technical support and help, response within 1 hour after receiving customers complaint, no matter you choose products problems or products quality, our technician all will help you solve them.
2. We keep 24hours online service.
3. We can based on your requirements, customized the products for you.
4. We provide the samples for testing by free.
Extension
Common mistakes and solutions of printing additives selection
1. Pay attention to solid content and neglect physical and chemical analysis
Many users of auxilaries attach great importance to solid content and take the combination of content and unit price as the basis for selection. In fact, it is not wise to do so.Physical and chemical analysis is the basis to check the quality of auxiliaries, the solid content is only one of the indicators.
After the comprehensive physical and chemical analysis, the bulk sample was tested, and the solid content was determined after the preliminary determination, which was used as the basis for checking the quality of the additive batch.
2. Pay attention to unit price and ignore comprehensive cost
Due to the fierce competition, under the huge cost pressure, many printing and dyeing factories attach great importance to the unit price of additives, but for the unit production cost is very general, more do not consider the dosage, efficiency, rework, repair and other comprehensive unit cost.At present, the competition of additives is also very fierce, under the pressure of the cost of
3.raw materials, it is difficult to achieve high quality and low price.
Compare price with same quality and quantity, or compare quality with same unit cost;Combined with actual energy consumption, production efficiency and process quality stability, calculate the unit comprehensive cost;Moreover, the actual unit cost should be calculated monthly to prevent the seemingly low calculation cost but high actual cost.
4.Emphasizing speed and convenience and ignoring long-term stability
Textile printing and dyeing factories require zero inventory of additives, fast delivery, it seems very scientific, but it is too harsh;Because each auxiliary manufacturers have their own strong points, and most auxiliary manufacturers are difficult to get close to the textile printing and dyeing factory, plus the timing of the production of auxiliary, printing and dyeing factory to prepare a week's inventory is necessary, is also reasonable and scientific.
5. Emphasizing the role of master and neglecting objective comparison
This is very prominent in some experience-oriented enterprises, where the managers (or masters) will use some additives and processes according to their own experience and habits and refuse other products;In this way, in addition to being partly driven by interests, it is more limited by its own lack of knowledge and technology, unable to distinguish the advantages and disadvantages of additives and afraid to use new additives.This is more prominent in low-end bleaching and dyeing, washing and dyeing, denim and other industries, which may easily lead to the long-term existence of problems such as substandard environmental protection, large batch difference, unstable quality, high actual cost, and difficulty in new product development.
Hot Tags: print fixer, China, suppliers, manufacturers, factory, customized, wholesale, Table Gum, Pigment Thickener, Print Silicone, Reactive Thickener, Anti Block Agent, Photo Emultion
