Factory supply print rubber paste
Cowint is a company with own R & D, production and sales.It can offer whole solution of textile screen print rubber paste with more than 20 years of experience, and always focus on water-based printing materials , reliable and stable quality.Its item ---The print rubber paste,for washing fastness can reach the brand standard, such as PUMA, H & M, Zara, etc;It has high solid content. In the printing of dark cloth, the covering rate of three times can reach 100%.
Optimal printing and dyeing scheme---we can help you !
Print rubber paste
The printing process uses special chemical gels and dyes to blend seamlessly.The dye is firmly attached to the fabric through the action of gel medium, and the printing process of glue pulp overcomes the limitation of water pulp printing.It can be printed on the blended fabric of cotton, hemp, viscose, polyester, polyamide, polypropylene, polyamide and all kinds of fibers. Dongguan is a manufacturer specializing in printing materials, and can customize solutions for customers.
Product Introduction
Product feature
It has excellent covering power, excellent film-forming property, flexible, smooth, elastic and glossy, good firmness
The process
Printing clear with 2 times
Printing white or color with 2 times
Curing
Curing Process
Temperature:130℃ with 90s.
Advantage
1. Excellent covering power, can be printed on dark ground color, such as black fabric, the product is similar to discharge printing effect;
2. Excellent film-forming property, flexible, smooth, elastic and shiny film;
3. Good compatibility with color coating, good fastness after fabric printing, not blocking the net, easy to clean equipment;
4. Light resistance, heat resistance, aging resistance, no yellowing or discoloration, good mechanical stability and storage stability.
Technology
Glue paste printing adopts silk screen printing, the number of silk screen mesh, generally around 80-120 mesh, to make screen plate, glue paste preparation after about 150 mesh screen filtering.
Four - color printing method can not be used to print color patterns;Because glue pulp is to use adhesive to paint solid color on the fabric, unable to carry out color matching;Pastes can be printed on dark fabrics in light colors because pastes are opaque and have good masking properties.
Glue printing can only print one color at a time, if you want to print the second color must wait for the front color to dry;
Process: screen plate - scraping rubber (2-3 times) - drying (140-150℃, 2-3 minutes) - pressing (140-150℃, 10-15 seconds).
Attention
Do mucilage printing, garment printing master should know a truth, clothing silk screen printing, water-based printing materials all have a common characteristic, namely: as the scraping blade back and forth movement, the inside of the printing material moisture to evaporate faster, then no matter mucilage printing or water slurry printing too, especially in hot weather in summer and autumn dry weather.
Clothes in silk screen printing, scraping blade every time can't be in printing can take printing paste neatly, especially over the pattern often produce thinner ink layer, the ink layer will form in a short time half dry membrane, the film was after the scraper with net hole is easy to cause the plug mesh, the formation of local boards to the phenomenon.Once the block version, printed patterns will appear in the sand, that is: revealing cloth shading.
Solution
(1) Just prepared waterborne printing paste, sometimes there will be some impurities or undissolved particles, this case, the use of 80 ~ 100 purpose gauze filter in full, the filtered slurry placed in the clean bucket with take in, every time after taking the pulp, with above the barrel cover film, to slow water loss and smudgy a cask.
(2) In the process of printing when the phenomenon of blocking the net, timely wipe the net hole with wet cloth, if necessary, with tap water to wash, but the water pressure should not be too high.After rinsing, wipe the water off with a clean, dry, soft cotton cloth.
(3) Before each work, such as the rest of the short and do not want to wash, must be the screen in the slurry with a scraper knife collection and evenly coated in the screen of the entire surface, pay special attention to cover every hole.Finally, a piece of wet cloth has been tiled on the surface of the paste, the purpose is to slow down the evaporation of water too fast.
In addition, every printing worker engaged in garment printing should always pay attention to the change of the thickness of the paste and the effect of the pattern after printing, and timely correct and solve the problems found
Hot Tags: print rubber paste, China, suppliers, manufacturers, factory, customized, wholesale, Flavor Print, Multi Color Print Ink, Foam Print Paste, Multi Colour Print, Imitating Silver Print, Water proof Nylon Print
