[NEW] Heat Transfer Heat Press Machine
[NEW] Heat Transfer Heat Press Machine

[NEW] Heat Transfer Heat Press Machine

The heat transfer machine is a more important part of heat transfer, it is mainly engaged in the process of transferring its patterns to clothes.
Send Inquiry

PRODUCT PROFILE

The Heat press machine can Heat transfer all kinds of hot heat press machine

stamping on cotton, hemp, chemical fiber and other fabrics.

It can also carry out process heat treatment such as screen

printing, glue and foaming. It can also bake color codes,

portrait photos and landscape patterns on porcelain and

metal plates.

Transfer Heat Press Machine is especially suitable for

making medals, commemorative cards and cultural shirts.

It is economical, practical and exquisite. It is replacing the

traditional embroidery and screen printing, but the cost

and effect are much lower and better than the general

embroidery and multi-color screen printing.

PRODUCT DETAILS:

Voltage220V/110V
Power1800W
Temperature range0-399℃
Time range0-99Sec
Worktable size38*38 / 40*50 / 40*60 (cm)
Net weight55kg / 65kg / 70kg
Casing size82*48*62 / 85*78*55 (cm)

MAINTAIN

1. Pressure: The Heat transfer result will be influence if the Heat press machine pressure is not enough or too large, the pressure screw rod (located at the bottom of the aluminum plate) can be adjusted. The clockwise direction is to increase the pressure, and the counterclockwise direction is to reduce the pressure.

2. Time: when the hot stamping time arrives and the buzzer does not sound or keeps ringing, check whether the contact point of the microswitch in the tail box is moderate. If it is not suitable, it must be adjusted to an appropriate position.

3. Temperature: preheat for about 15 minutes. When the temperature reaches the set temperature, the heating indicator light goes off and hot stamping can begin; If the heating plate does not heat after starting for several minutes, please check the circuit.

1.Heat press machine 1

THE USAGE OF HEAT TRANSFER HEAT PRESS MACHINE

1. Pull up the direct pressure handle to fully open the heating plate. Plug in the power supply, turn on the power switch, and the indicator light is on;

2. Temperature adjustment: press the "+" or "-" key to set the temperature;

3. Adjust the left timer knob to an appropriate time of 10 seconds (the length of time depends on different materials);

4. When the temperature reaches the set value, the Heat press machine will automatically enter the constant temperature state;

5. Place the transferred objects such as clothes and on the printing table, then stack the pictures to be transferred, and press down the pressure handle;

6. When the time comes and the buzzer rings, lift the pressure handle, take out the transferred object such as clothes, and tear off the backing paper.

Hot Tags: Heat press machine,Heat transfer,Transfer Heat Press Machine,China, suppliers, manufacturers, factory, customized, wholesale