(1) The SANAX round mesh wax spraying machine is compatible with all current data formats, such as BMP, 7nFF, etc.
(2) If conditions permit, a network server can be used to centrally manage the computer color separation and wax spraying network LAN for the storage of electronic data of pattern drafts. The main server will store the electronic data of the pattern drafts after computer color separation. If there are no conditions, one should also purchase a CD recorder to save the pattern draft.
(3) To avoid interference from other operations on the main control computer of the wax spraying machine, it is best not to share the main control computer of the wax spraying machine.
(4) Due to the absence of typesetting and printing, the computer color separation draft must be carefully checked and confirmed to be correct before submission to the wax spraying net.
(5) It is necessary to confirm the starting position of the pattern on the computer after sketching to ensure symmetry and aesthetics of the pattern.
(6) Because the wax sprayer can automatically retract, there is no need to create a TIF file after sketching. The circular size error is within 20Pixels, and it can be ensured that there is no difference from the original without edge stitching.
Requirements for wax spraying and mesh making process:
(1) Fully round the circular mesh, otherwise it will affect the accuracy of wax spraying.
(2) When applying the adhesive, it is required that the photosensitive adhesive be evenly coated and free of particles. To ensure the quality of the adhesive, the photosensitive adhesive should be adjusted 24 hours in advance to eliminate bubbles. (3) It is advisable to use 4-5 rain during exposure, as it will not peel off over time.
(4) It is advisable to soak at a water temperature of 30% for about 8 minutes during development.
Cowint is the largest DTF Film Factory in China
