1.Company Profile
Dongguan Cowint New Material Technology Co.,Ltd is a high-tech enterprise which focuses on printing and dyeing materials,one company of ZHONGTIAN Group. Our company specializes in research and development, production and sale of medium and high grade printing materials,packaging water borne adhesives,water- based light oils and other printing and dyeing materials.
The company has set up two major production bases which covers an area of more than 18000 square meters, which are located in Dongguan Zhongtang & Dalang, annual production capacity of more than 20,000 tons.And company is the Top 10 enterprises in Chinese printing and dyeing industry area.
2.Product display
3.Product Overview
pH valueTechnical index | Scope of application | Features | |
Exterior | Milky white paste | It is suitable for printing on all kinds of needles, woven cotton, T/C cloth, cotton pull frame and modal fabrics with medium and high elasticity. | It is thick and quick to use directly, soft to the touch, dry, high fastness, and good operability. |
pH value | 7-8 | ||
Ionicity | Anion | ||
4.Instructions for use
Recommended formula | Printing conditions | Printing process | ||
1905 | 100-98% | scraper | Water | Printing → natural drying → passing through the drying tunnel (130°C-150°C, 1-3 minutes) → finished product |
CT27 | 0-2% | Net yarn | 1000-1200 mesh | |
Color type% | x | overheat | 130°C-150°C，1-3min | |
Number of knives | One cut and two cuts | |||
Remarks:
① In order to achieve a better washing effect, it is recommended to use a primer that matches the fabric for 2 times, and then use PP1905 to print 10-15 times;
② Make sure that the printing is completely dry when testing, otherwise the test results will be affected;
③ To achieve the best effect of this product without heat treatment, it is recommended to add CT-27 additives or extend the natural air-drying time appropriately.
5.Finished product performance
Test items | Performance | Detection method |
Softness | 4 | Internal standards (level 5: very soft; level 4: soft; level 3: moderate; level 2: hard; level 1: very hard) |
Machine wash fastnessDryness | 3 | Internal standards (level 5: very dry; level 4: dry; level 3: moderate; level 2: slightly sticky; level 1: sticky hands) |
pass | 60°C water temperature, 5g washing powder, standard washing for 2.5 hours, washing and drying cycles of 5 times |
Remarks:
① Test piece cloth type: Modal cloth;
② Test film printing formula: BP2155 bases 2 times, PP1905 prints 15 times;
③ The printing process of the test piece: water-based scraper, 1200 mesh net yarn, one cut and two cuts, 130-150°C overheating 70S.
6.Notes
Operation matters | Storage conditions | Emergency measures |
Take safety precautions during the printing process; please recycle and dispose of the waste slurry instead of discarding it at will。 | Store in a cool and ventilated warehouse; keep away from heat and direct sunlight; keep the container tightly closed | After contact with skin and eyes, please wash with plenty of water. If you feel unwell, please consult a doctor; if inhaled or swallowed, please consult a doctor. |
7.Certificate
Our company's products have corresponding environmental protection certificates and some test certificates. If you need any other certificates, we can also test our products according to your requirements.
Hot Tags: water-based thick board slurry, China, suppliers, manufacturers, factory, customized, wholesale, Fabric 4d Printing, Imitation Silver Print, Flavor Print, Multi Color Print Paste, Imitating Silver Print, T shirt Color Change Print
