High quality OEM 3D transfer logo customized
Popular product High quality OEM 3D transfer logo customized is for Garment cotton, it is mainly made of advanced PET materials in the industry. The printing effect is good, and it can carry all kinds of creative works.
High-end printing brand----Cowint.
Product Introduction
Now our most popular product is High quality OEM 3D transfer logo customized for garment cotton Its main function is to transfer the design pattern from the thermal transfer film to a variety of different fabrics. Thermal transfer printing is compared to traditional screen printing, Its advantages are Reflected in the fast and convenient printing, fast drawing, and no chemical pollution, you can make a variety of patterns on it, and then make it on the clothes by heat transfer
Product details
Advantages
The printing technology integrates green, environmental protection, low carbon, energy saving, emission reduction and ecology, which is a major breakthrough in textile printing technology.After printing fabric, soft, bright color, rich layers, good air permeability
The heat transfer printing process can be used to check the printing paper before cloth printing, and it can be removed at any time once it is found that there are defects such as inaccurate flower and color drawing.Therefore, the clothing and other fabrics printed with thermal transfer printing process, there are few printing defects.
Influence of powder coating on transfer printing quality
①Transfer product substrate. The quality of the surface will directly affect the transfer effect and weather resistance of the final transfer products. When spraying powder, choose the powder with good weather resistance, usually polyester, followed by poly Ammonia ester, spraying thickness is more than 60 μ M.
②The appearance effect of the transferred coating is very important, such as smoothness, gloss, color, etc., which will directly affect the surface effect of the substrate after transfer. If the surface of the transferred substrate is high gloss, the transferred product is also high gloss.
After heat transfer printing, the causes of poor paper or film off phenomenon appear？
①There are quality problems on the surface of the substrate to be transferred, such as high temperature resistance, sticking paper or mucous membrane.
②After spraying, the powder layer on the surface of the transferred substrate is not completely solidified, resulting in re curing in the thermal transfer printing.
③If the heat transfer glue is used, the quality, ratio and concentration of heat transfer glue and the amount of brushing will directly affect the paper stripping.
④ If the heat transfer glue is used, it is suggested that the release agent (also known as silicone oil) can be properly added into the heat transfer glue to solve the problem of paper stripping.
More news
● Heat transfer printing is to transfer the design from one DU zhi dao to another medium through the heat rise Baihua principle.The pre-prepared Zhuan pattern is printed on the heat-resistant substrate film, and then with the heat transfer equipment, the pattern is transferred to the material supplier to be printed by high temperature pressing.
● According to the transfer principle, the use of hot iron can also achieve the effect of heat transfer.
● The pattern effect that USES electric iron heat transfer printing comes out is not good, because the temperature of electric iron and pressing area accept is uneven.Can not make the picture uniform heating, and the temperature of the iron is often difficult to grasp, because the transfer quality is uneven.
Hot Tags: oem 3d transfer, China, suppliers, manufacturers, factory, customized, wholesale, 3D Transfer Sheet, high quality dtf film, Transfer Sheet, Hot Melt Adhesive Powder, direct to film, clear dtf film
