Analysis Of Low Printing Resolution And Shortened Film Usage Time

Jul 22, 2024 Leave a message

1. Problem: Low resolution, loss of subtle levels
Reason: During the printing process, the contact between the negative film and the adhesive film is not solid; The quality of the negative film (positive image) is poor; The photosensitive adhesive itself has poor quality and low resolution; Improper selection of light source; The mesh size of the wire mesh is too low; Rinse treatment.
Solution: Use vacuum adsorption or other methods to make it in close contact; Check the film density and image quality; Select high-quality photosensitive adhesive; Use a light source that is compatible with the spectral sensitivity of the photosensitive adhesive; Select high mesh wire mesh; Check the flushing procedure, adjust the water pressure and temperature.
2. Problem: Shortening the usage time of the film
Reason: Poor degreasing of the wire mesh and incomplete descaling; The wooden mesh frame undergoes deformation; The tension of the screen is relaxed, and the photosensitive film surface undergoes unbalanced shrinkage; Excessive drying temperature causes deformation of the wire mesh; Insufficient thickness of adhesive film; Insufficient ink fineness or presence of foreign objects; Mechanical friction; Improper solvent may react with photosensitive adhesive; Insufficient exposure time; Poor ink quality, drying too quickly on the screen, and washing too many plates; Excessive scraping pressure during printing.
Solution: Clean the silk cloth thoroughly with high-quality cleaning agents; Replace with aluminum mesh frame; Increase the tension of the mesh; Control the drying temperature according to the instructions for using photosensitive adhesive; Apply evenly
Cloth, increase the thickness of the adhesive layer; Continue grinding the ink, filter it before use; When washing the plate, use a softer item to scrub, and pay attention to matching the solvent with the photosensitive adhesive; Increase exposure time through exposure testing; Improve ink quality, avoid drying too quickly, and reduce the number of wiping times; Reduce the pressure on the scraper and grind the scraper rubber strip.

Cowint is the largest DTF Film Factory in China

COWINT DTF