Cowint TDS of Flocking Paste
DONGGUAN COWINT NEW MATERIAL TECHNOLOGY CO.,LTD
No.2,West Industrial Road of Jiaoli,Zhongtang Town,Dongguan
Tel: +86-769-88882603 Web:www.cowint2.com
mail: info@cowint.com
1. Need products:
CTS-F620 Flocking Paste
Fixer:CT-31
2.Used method:
98% Flocking paste + 2% additives;
The printing process of the test piece: the first
time of flocking pulp primer → drying → the
second time of printing, leaving the pulp and flocking
→ 145°C overheating for 90S → finished product.
2.
The printing process:
98% Flocking paste + 2% additives;
Flocking pulp first time → blow-drying → printing
for the second time leaving pulp and flocking → natural
drying or drying → finished product
3. Attention:
1.Please use up the flocking pulp with additives within 3-4 hours to avoid instability;
② The flocking pulp contains a special self-crosslinking polymer, which can autocatalyze during drying and processing. It can reach the ideal fastness after being placed at room temperature for 48 hours;
③ For fabrics with high elasticity (or coarse fabric), it is best to use flocking pulp as a primer first, and then stamp the flocking pulp once after half-drying. (Do not blow dry) immediately flock (flock) to improve the three-dimensional feeling of flocking (flock) And fastness.
④ Make sure that the printing is completely dry during testing, otherwise it will affect the test results.
⑤ 140-160°C, 90S: 2.2m drying tunnel 10 turns.
