1. Medium temperature foaming paste, high temperature foaming paste
Foaming paste is a heat-sensitive foaming paste for water-based printing and dyeing. Through short-term heat treatment, the pattern can be multiplied in three dimensions, and it has the characteristics of soft hand feeling, strong tensile strength, and three-dimensional uniformity after foaming.
After heat treatment, the foaming paste has the characteristics of high three-dimensional effect, high coverage and good elasticity. For clothing and textile decoration, it can replace artificial embroidery, pennants, covers, trademarks, wallpapers and other art products.
The foaming paste printing process is very flexible. You can adjust the amount according to your own needs for the convex surface. You can also choose the corresponding medium-temperature foaming paste or high-temperature foaming paste according to your own equipment and temperature requirements.
2, suede foam paste
Appearance: white paste
Packing: 30kg/drum
Fluff pulp is a special resin copolymer, which can be used on cotton, cellulose fiber, Lycra and silk, various base fabrics and other fabrics to obtain the effect of flocking.
Features of foaming paste
It has good overprinting ability on dyed cloth bases, and can also be added with common paint colorants for tinting.
The fleece pulp forms a soft and elastic film. After printing, the washing water requirement can be reached at a constant temperature of 60 degrees for 2 to 3 hours.
Printing process and application of foaming pulp: adjust the color of suede pulp according to actual needs and directly print it on the fabric. It is better to print 2 to 3 times, then bake at 150 ℃ and fix it for 2-3 minutes. The temperature is too high or too high. Low will affect the effect and feel of the suede, you should pay attention when operating.
3. Chemical fiber foaming pulp
Foaming paste features:
The foam is flat and soft, with excellent elasticity and good fastness. It is suitable for Lycra and chemical fiber fabrics. The foaming temperature is low to avoid the problem of high temperature shrinkage and deformation of chemical fiber fabrics.
Foaming paste printing process and application:
A. Foaming paste can be mixed with high elastic transparent paste for better effect
B. It is best to use high elastic transparent paste as the base first, and then print the foam paste to obtain better hand feeling and fastness.
C. Heating: drying at 80-120 degrees, 2-3 minutes, pressing at 80-100 degrees, 10-15 seconds.
4. Denim foam paste
Foaming paste features:
A. It has the characteristics of soft hand feeling, strong tensile strength, and three-dimensional uniformity after foaming.
B. The film is transparent, with high color yield and rich vividness.
C. Very soft feel, low usage.
Foaming paste printing process and application:
Suitable for denim foam printing, recommended dosage: 10-30%
The above suggestions are for reference only.






















