From the resolution of inkjet printing pattern, the selection of pattern scanning resolution, the color correction of inkjet printing pattern, the establishment of scanner's characteristic file, and the descreening process, we will introduce the problems that should be paid attention to in making inkjet printing pattern. :
1. Resolution of inkjet printing patterns:
The resolution of digital inkjet printing patterns is expressed in pixels. Inkjet printing has lower requirements for pattern resolution than desktop printers, generally 100dpi/in, and the minimum cannot be lower than 72dpi/in. Some pictures downloaded from the Internet cannot meet this requirement, so it is difficult to obtain the ideal inkjet printing effect.
2. Choice of pattern scan resolution:
When scanning inkjet printed patterns, the choice of scanning resolution is very important. The larger the resolution, the richer the layers, but not the bigger the better. The larger the resolution, the longer the scanning time and the lower the image processing efficiency; the resolution should not be too small, otherwise the image level loss will be large and the quality will not be guaranteed. The determination of scanning resolution can generally refer to the following formula:
Scanning resolution=2×the number of mesh lines of the artwork×the magnification of the artwork. For example, if the size of an original is 12cm×18cm, now it needs to be enlarged 5 times to 60cm×90cm, and the number of lines in the picture is 150lPi (LinePerInch), then the required scanning resolution should be 2×150×5= 1500dpi. The number of hanging net lines of textile fabrics is generally selected to be below 100lpi; high-end albums and magazines are selected to be above 150lpi.
3. Color correction of inkjet printed patterns:
When color experts discuss color, they all revolve around human visual psychology. The color difference felt by people is the level. The richer the color difference and the more suitable for people's ability to distinguish, the stronger the three-dimensional sense of the picture felt by people, and the more beautiful the color. Scanning is the first hurdle that affects color reproduction, and attention should be paid to the color calibration of the pattern.
4. Create a scanner profile:
The scanner's profile is used to define the true color of the scanned image, usually the scanner comes with a profile. In order to make the color of the scanned input image more realistic, it is necessary to further calibrate the scanner and obtain a new characteristic file. In addition, some software can specify the inkjet printer to print the image file of the calibration scanner, and then use the colorimeter to measure the color data, and then scan and input the printed calibration chart through the scanner, and obtain the characteristic file after calibration. The color gradation of the printed manuscript can be adjusted by using the scanner's profile.
5. Descreening:
The texture on the textile surface and the "moire" on the printed matter will affect the quality of the artwork. In order to remove these textures, descreening can be performed with the Descreen command in the inner scan option. In the de-screening option, the smaller the value entered, the more obvious the de-screening effect, but at the same time the image will become more blurred. Therefore, the parameters for descreening should be determined according to the type of the original. In the case of photographs and transmissions, detexturing is not necessary.






















