DP6030 digital primer

May 12, 2021 Leave a message


1 Product overview

Technical index

Scope of application

Features

Exterior

Paste

Suitable for deep and medium-colored fabrics of various needles, woven cotton fabrics and T/C fabrics.

 

① It has a soft hand feeling and excellent stretching force.

② After SGS testing, the four items including formaldehyde, APEO, PVC/phthalate, and heavy metals all meet EU requirements.


pH

6-7


   Ionicity



Anion

Remarks: Please refer to the test report for the details of environmental protection indicators.

 

 

2 Instructions for use

Recommended formula

Printing conditions

Printing process

DP6030

100%

Scraper

65 degree water-based scraper

DP6030 transparent pulp base → digital glue printing → wet spray → CM2609 (2608) skin-feel dumb surface covering paste + 3% CT30 additive printing once → pass through the drying tunnel (130°C -150°C, 3min-5min) →Finished product

Net yarn 

1000-1500 mesh

Overheating

130°C -150°C,3min-5min

Number of cuts

up two down two cuts, 2-3 times

Remarks:

 ① Make sure that the printing is completely dry when testing, otherwise the test results will be affected;

 ②In order to achieve the best effect of this product without heat treatment, it is recommended to add additives or extend the natural air-drying time appropriately.


 

 

 

 

 

 

 

 

 

3 Finished product performance

Test items

Performance

Detection method

Softness

3-4

Internal standard (level 5: very soft; level 4: soft; level 3: moderate; level 2: hard; level 1: very hard)

Elasticity

3-4

Internal standards (level 5: high elasticity; level 4: good elasticity; level 3: moderate; level 2: elastic deviation; level 1: no elasticity)

Machine wash fastness


Machine wash fastness

pass

60°C water temperature, 5g washing powder, once every 1h, 5 times in a row.

Remarks:

① Test piece cloth type: cotton cloth;

② Test piece printing formula: 8030 transparent paste for base; 8025W white glue paste; 609 cover paste + 3% additives

③ Test piece printing process: 65 degree water-based scraper, 1200 mesh screen, 3 knives and 2 times, wet spray; 609 covering paste once, overheating at 130°C-150°C for 3min-5min.


 

 

4 matters needing attention

Operation matters

Storage conditions

Emergency measures

Take safety precautions during the printing process; please recycle and dispose of the waste slurry instead of discarding it randomly.

Store in a cool and ventilated warehouse; keep away from heat and direct sunlight; keep the container tightly closed

After contact with skin and eyes, please wash with plenty of water. If you feel unwell, please consult a doctor; if inhaled or swallowed, please consult a doctor.