Product Introduction
Product number： CTR-H310W\C
product name： Hand Printing Paste
Special Statements: Very Soft,High Covering\Elasticity\Fastness,Not Sticky Back
Suggested Mesh: 40-48T
By Machine\Hand: By Hand
Heating Temperature: Natural Dried\130℃（3minutes）
Textile Material: Cotton,Blended
Auxiliary Agent: No
The appearance of glue and its wide application in water slurry, because of its very good coverage, so that dark clothes can also be printed with any light color, and it has a certain gloss and three-dimensional effect, making the garment look more high-end So it is quickly popularized, and it is used on almost every printed T. But because it has a certain hardness, it is not suitable for large-area solid patterns. It is best to print large-area patterns with water paste, and then dotted with some glue, which can solve the problem of large-area glue hard and highlight the pattern. There is also a way to steal a large area of solid patterns to make a bad effect, but it is always a bit hard to wear, so it is better to combine water and glue to solve the problem of large-area printing. . There are glossy and matte surfaces, soft, thin, environmentally friendly and can be stretched.
Because the glue is relatively dense and viscous, the number of general printing colors is limited. In rotary screen printing and flat screen printing, the number of color sets should generally not exceed 5 sets, otherwise it is easy to cause uneven printing surface and uneven color (because (The color printed on the front is not completely dry when printing the color on the back)
In the piece printing, the glue printing method is different from the fabric printing. You can wait for the color printed on the front to dry a little before printing a set of colors, so you can print more colors and maintain the gloss and gloss of the printed part. The color does not change.
Product effect
