What are the differences and characteristics of water slurry and glue printing?

Jun 08, 2021 Leave a message

Printing is divided into reactive printing and pigment printing; pigment printing also includes water slurry printing and glue printing. The finished product printed by water slurry printing generally has a slightly worse hand feel than reactive printing, while the finished product printed by glue printing has a hard hand feel, which is generally used for partial embellishment on clothing, such as corsages, sleeve flowers, etc.

1. Water-based-print. It is the earliest printing technology applied. The material used for printing patterns is water-based paste, similar to the pigments or dyes used in painting. Through the technical treatment of the printing screen, the paste can penetrate into the fabric where there are patterns, and the places without patterns can not penetrate, so that the patterns can be printed on the fabric. The water slurry printing process is one of the most basic printing processes in the screen printing industry. It can be printed on almost all light background fabrics such as cotton, polyester, linen, etc., and is widely used. Its working principle is similar to dyeing, but the difference is that it "dyes" a certain area of the fabric into the color required for the flower position. Therefore, this process cannot be applied to dark background fabrics. The biggest advantage of the water slurry printing process is that it is widely used, the flower position fastness is very good, and it can print better results at a relatively low price. The limitation of the water slurry printing process is that it cannot be applied to all dark fabrics.


        Its characteristics are: only one color can be printed at a time, if you want to print the second color, you must wait for the previous color to dry before proceeding; you need to make a printing plate: generally you can't use four colors to print color patterns, and you can't print in dark colors. Light-colored patterns are printed on the fabric; the advantage is that the printed fabric has good air permeability, but because it needs to be washed during printing, the clothes will become

hard.


        This method is more used for cloth printing.


        2. Glue printing. The basic process is the same as that of water slurry printing, except that the materials used are glue pigments that will solidify on the fabric after drying. The glue printing process uses a special chemical gel and dyes to be highly seamlessly mixed. The dye is firmly attached to the fabric through the medium of the gel. The glue printing process overcomes the limitations of water-based printing. Its characteristic is to adapt to printing of various color depths and materials. It can be printed on blended fabrics of cotton, linen, viscose, polyester, nylon, polypropylene, chloride and various fibers, as well as on leather, artificial leather and other materials. For printing, it can be used for fluorescent printing, inkjet printing, Lanhua printing, electrostatic flocking printing and other printing processes. The biggest advantage of the glue printing process is that it is widely used, beautiful in color, and high in reduction. However, its printing process is more complicated than the water slurry printing process, and the cost is relatively high.


        The characteristics are: only one color can be printed at a time, if you want to print the second color, you must wait for the previous color to dry before proceeding; you need to make a printing plate; generally you cannot use four colors to print color patterns; because the glue is opaque, It can also print light-colored patterns on dark fabrics; poor air permeability; patterns that are not washable and easy to fall off, especially when used in chemical fiber fabrics.

At present, the most common printed T-shirts on the market are mostly printed with glue.

The difference between reactive printing and pigment printing

Reactive printing: reactive dyes are water-soluble dyes. Its printing characteristics are: (1) The printing process is relatively simple, the color matching is convenient, and it can be printed together with a variety of dyes or dye-resistant printing. (2) The pattern is bright in color, the light color in the color spectrum is complete, and it has good wet processing fastness. (3) It is easy to operate the preparation of the color paste, with fewer defects and easy to find during printing, and the printing effect is good. In addition to adapting to cotton fabric printing, it also has certain application value on chemical fiber fabrics. Compared with pigment printing, knitted fabric reactive printing has many advantages, such as good air permeability, excellent fastness, and soft hand feel, but there are also problems such as cumbersome printing process, long process and difficult processing. Reactive printing generally uses high-viscosity sodium alginate . For paste flow (it has small denaturation, small oozing volume, can better maintain the original pattern.) Most of the use of double reactive group M type reactive dyes (the dye has better fixation rate and lifting power, at the same time , Can reduce the discoloration during soaping. Prescription/9 L-reactive dye x urea 1-2x anti-dyeing salt S 10 material, appropriate amount of water, appropriate amount of alkali agent 15-30) Pigment printing: Pigment printing is direct printing with paint, this process It is usually called dry printing to distinguish it from wet printing (or dye printing). By comparing the hardness difference between printed and unprinted parts on the same fabric, pigment printing and dye printing can be distinguished. The pigment-printed area feels a little harder than the unprinted area, maybe a bit thicker. If the fabric is printed with dyes, there will be no obvious difference in hardness between the printed and unprinted parts. The paint is not particularly abrasion resistant, especially in dark colors. Dark paint should be especially avoided in furniture and upholstery fabrics. Pigment printing is the cheapest printing method in printing production, because the printing of paint is relatively simple and requires the least process, usually without steaming and washing. The paint has bright and rich colors and can be used for all textile fibers. Their light fastness and dry-cleaning fastness are good, even excellent, so they are widely used in decorative fabrics, curtain fabrics and clothing fabrics that require dry cleaning. In addition, the paint hardly produces large color differences on fabrics of different batches, and the coverage of the base color during overprinting is also very good. With continuous washing or dry cleaning, the pigment printing will gradually fade and the color will become lighter and lighter. This is due to the gradual fall off of the resin binder due to constant rotation and stirring during the cleaning process. Generally after 20-30 times of washing, this kind of printed cloth will show obvious fading phenomenon. Pigment printing process is to use appropriate organic substances to form a resin film on the fiber and fix the pigment on the fiber. The ecological problems in the waste water and waste gas generated in the production process of paint printing can also cause harm to the human body. The problem that has a relatively large impact on the human body is mainly concentrated on the formaldehyde content of the fabric. According to ISO 14184-1, the free formaldehyde content of baby clothes and adult underwear must be ≤20ppm and 75ppm respectively, and judging from the current textile market situation, there is a trend to further strengthen the requirements for free formaldehyde content on fabrics.


1 Transfer printing: (English: tropical print) first use printing method to print the pigment on the paper to make transfer printing paper, and then transfer the color to the fabric through high temperature (heating and pressing on the back of the paper), generally used for chemical fiber The fabric is characterized by bright colors, delicate layers, vivid patterns, and strong artistry, but the process is currently only suitable for a few synthetic fibers such as polyester. The transfer printing process is simple, the investment is small, and the production is flexible. It is currently more popular in the market... But to be honest, compared with other types of printing, the price is a bit higher, but it is of a certain grade~~

2. Discharge printing: (English: wash out colors) (discharge) discharge print (discharge printing) use dyes that are not resistant to discharge agent to dye the ground color, after drying, use a discharge agent or at the same time a discharge resistant In the post-processing, the ground color dye is destroyed and decolorized, forming a white pattern on the color ground or a colorful pattern formed by dyeing with the color dye. Also known as whitening or coloring.

3. Reduced printing: This process uses the difference in chemical resistance properties of different fibers in the interwoven or blended fabric, and applies a burnout agent through the printing method to partially remove one of the fibers in the fabric, leaving the other fibers to form a translucent pattern. Also called burnout printing or burnout printing.

4. Crinkle printing: Use printing methods to locally apply chemicals that can expand or contract fibers on the fabric, and through appropriate treatment, make the difference between the expansion or contraction of the fiber in the printed part and the fiber in the non-printed part, so as to obtain regular unevenness on the surface Flower-shaped products. Such as cotton printed seersucker with caustic soda as bulking agent. Also called bump printing.

5. Flat screen printing: The printing mold is a polyester or nylon screen (pattern) fixed on a square frame and has a hollow pattern. The pattern on the pattern can be penetrated by the color paste, and the non-patterned place is closed with a polymer film. When printing, the pattern is pressed tightly on the fabric, and the color paste is placed on the pattern, which is scraped back and forth with a scraper to make the color paste reach the surface of the fabric through the pattern. Flat screen printing has low production efficiency, but has wide adaptability and flexible application, which is suitable for small batch and multi-variety production.

6. Rotary screen printing: The printing mold is a cylindrical nickel-skin screen with a hollow pattern, which is installed in a certain order above the circulating rubber belt and can rotate synchronously with the belt. When printing, the color paste is input into the net and stored at the bottom of the net. When the rotary net rotates with the guide belt, the scraper pressed against the bottom of the net and the flower net are relatively scraped, and the color paste reaches the surface of the fabric through the patterns on the net. Rotary screen printing is a continuous process, high production efficiency, and has the advantages of roller and flat screen printing, but there are certain limitations in the fineness of the pattern and the richness of the printing color. ****Remember: Rotary screen printing has certain limitations in color selection

7. Pigment printing: (English: pigment print) is also called pigment printing. Because the pigment is a non-water-soluble coloring substance and has no affinity for fibers, its coloring must be coated with a film-forming polymer compound (adhesive) and fiber The adhesion effect is achieved. Pigment printing can be used in the processing of any fiber textiles, and it has advantages in the printing of blended and interwoven fabrics. It has simple process, wide color spectrum, clear flower contour, but it has poor hand feeling and low rubbing fastness.

A. Water slurry printing is characterized by soft hand feeling and bright color~~ But water slurry has a major drawback.

The color of the water slurry is lighter than the cloth color~~If the color of the cloth is darker, the water slurry will not cover it at all~~~This is the case at present, but we will see the development of science and technology in the future~~~

B. Glue printing. There are glossy and matte surfaces, soft, thin, environmentally friendly and can be stretched~~

Generally speaking, glue printing is more commonly used, like leisure brands such as "Yi Chun" basically use glue~~~

Forget to remind, both glue printing and water slurry printing can be washed with water~~~

Comparing the price of the two, the glue is still cheaper than the water slurry

C. Ink printing. Features Bright color and vivid image.

There was a wave of head prints on the market some time ago~~ I don't know if you are paying attention, so clear and super realistic prints generally only

Only ink printing can produce such an effect~~Sometimes you can also sprinkle some gold powder and silver powder on the ink, and the decorative effect is better~~

The price of ink printing is not very clear, but the price of printing is generally based on the number of colors used. There are more colors for ink printing, and the price should be relatively cheap~~

There are also powder paste (some people say that it is a kind of ink, which is thinner than ink. After printing, the fabric pattern can be stretched, the color is bright, and it can be washed. In addition, the price of ink is higher than that of water paste and glue. expensive)

Thick plate glue: thickened glue

Planting glue: similar to thick board glue, but looks cleaner and neater than thick board glue.

Flocking: It has a soft hand and bright colors, but it will come off when washed with water. If you want to wash with water, you must first strengthen the colorant.

By the way, there are foaming, slurry drawing, gel paste, bronzing, silver bronzing and so on, but I don't know how to describe it.

Types of printing:

1. Classified by fabric: cotton, blended, silk, denim, fur, rainproof cloth, tendon cloth, non-woven cloth, etc.

2. Classified by material: water-based printing, glue printing, ink printing, thermosetting printing, gold and silver powder, laser printing, foam printing, silicone printing, reflective printing, flocking

3. Classified by process: manual printing, transfer printing, letterpress printing, dial printing, dot printing, four-color printing.