Usage Of Rotten Flower Printing Paste

Aug 05, 2024 Leave a message

(1) Mix 90 parts of Rotten Flower Paste A and 10 parts of Rotten Flower Agent B evenly. The usage method for EG-30 product and domestically produced DC-562 product is to take 90 parts of each product and add 10 parts of concentrated sulfuric acid (or their company's rot agent) and stir evenly.
Using a BRO0KFEILDDV-II viscometer, the viscosity of the three slurries was measured at the rotational speed of rotor 12, and the viscosity was between 8000-9000 cP.
(2) Take the above three types of pulp separately, and use a 120 mesh printing net on the RC-MP2000 magnetic rod printing machine. Use the same magnetic rod, magnetic force, and speed to print on the same polyester cotton fabric.
(3) Cut the polyester cotton fabric printed with three types of pulp into 8 pieces, mark them separately, and use an R-3 automatic dryer (Taiwan) to dry them at a selected drying temperature of every 10 ℃ between 100-180 ℃.
(4) Put the dried fabric sample into the same washing machine for washing, neutralize it after 15 minutes, and then dry it to obtain the finished product.

Cowint is the largest DTF Film Factory in China

COWINT DTF