Causes of poor silicone thermal transfer

Apr 10, 2021 Leave a message

I believe that many friends want to know this question especially, especially for insiders, only by knowing the reasons that cause the product to be bad can we better solve the problem and ensure the quality of the product. Then let’s take a look. What is the cause of the poor thermal transfer of silicone rubber?

1. Scratches, scratches, grooves, dents or cuts on the outside. Cause: Touching with foreign objects or improper operation method.

2. Gap, the product is incomplete, and there is a concave section. Cause: Improper ejection method or damage by external force.

3. Shrink the edge and crack at the parting surface. Cause: The mold temperature is too high or the vulcanization pressure is insufficient, and the mold is deformed.

4. Poor bonding, separation and fall of the rubber material and the frame. Cause: The adhesive is wrong, the surface treatment of the skeleton is not in place

5. Impurities, there are visible particles of different colors on the surface, such as foreign matter, dirt, mimeograph, etc. Causes: dirty rubber, dirty molds, contact with foreign objects or improper placement of the product.

6. The insert is out of position, and the insert violates the specified position. Cause: Improper placement of the insert, too large gap between the positioning core and the insert.

7. Delamination, the rubber part of the product cannot form a whole, and there is a phenomenon of two layers of skin. Causes: the surface of the rubber material is contaminated, the rubber material with poor compatibility is not uniformly mixed, and the rubber material is blooming.

8. Wrong mold, dislocation of product parting surface. Cause: Loose positioning pin, imprecise mold clamping, and unreasonable mold.

9. The burr is too thick, and the extra data that is not part of the product is thicker. Cause: Too much rubber and too large gaps on the parting surface of the mold.

10. Sticking to the mold, the appearance of the product is not smooth and flat, and there is a phenomenon of fuzzing. Cause: The mold temperature is too high, and the cavity is not cleaned up in time after falling.

 

   The above points are the reasons for the poor thermal transfer of silicone. We will stop here today. For more information, please feel free to contact us.